All Products
Burst Fire Regulator - FC11BL/2
Description
A burst fire power controller driven from a remote potentiometer, voltage or current signal.
The firing circuit is designed to give variable on/off output ratio, proportional to a wide range of common voltage or current control signals.
The module can be used on line voltages from 110V to 230V simply by selecting the type of auxillary transformer used.
- Output status LED
- Soft start in phase angle mode
Technical Specifications
- Line Voltage:
12V to 250V RMS @ 50/60 Hz
- Power Rating:
(max @ 230V) : 5.75kW
- Control Options:
Manual potentiometer (typically 5kOhms)
Voltage signal (typically 0-5V or 0-10VDC)
Current signal (typically 4-20mA)- Auxillary supply:
18V to 24V AC @65mA
- Cycle Time Base (Nominal):
1 second
- Max Operating Temperature:
65°C
- Dimensions:
L73 x W44 x H44mm
Applications
- Firing Circuit
