Description

A dual mode power controller driven from a remote potentiometer, voltage or current signal.

A wide range of common voltage or current control signals is
accepted by the module plus manual control via a potentiometer.
An LED indicates the output status of the controller.

This module will operate in either phase-angle or burst-fire mode.
It can be set up to soft-start in phase-angle mode, then switch
over to burst-fire mode once the set point level is reached.

The unit is not restricted to 230v or 400v applications as the auxiliary
transformer can be selected to suit any line voltage up to 440v.

• Output status LED
  
• Adjustable soft start

Technical Specifications

Line Voltage:

5V to 440V RMS @ 50/60 Hz

Power Rating:

(max. nominal): 5.75kW

Control Options:

Manual potentiometer (typically 5k§Ù)
Voltage signal (typically 0-5V DC)
Current signal (typically 4-20mA)

Auxillary Supply (Transformer):

10V to 18V AC @ 75mA

Recommended RFI Suppression:

F-type series filter

Soft Start:

1 to 30 seconds

Max Operating Temperature:

65¡ÆC

Dimensions:

L92 x W62 x H44mm

Applications

• Air Conditioning
• Air Curtains
• Annealing
• Battery Chargers
• Boilers
• Bowl Feeders
• Cathodic Protection
• Chlorine Production
• DC Reclamation
• Dryers
• Electro plating
• Electromagnets
• Energy Saving
• Extruders
• Halogen Lamps
• Heater Mats
• Heaters
• Heating & Ventilation
• Heating Tape
• Hot Plates
• Hot Wires
• Hydrogen Production
• Immersion Heaters
• Induction Heaters
• Industrial Dimmers
• Industrial Heaters
• Industrial Vibrators
• Infra-Red Heaters
• Magnetic Coil
• Ovens
• Quartz Lamps
• Runway Lighting
• Shakers (food)
• Smelting
• Soldering Pots
• Space Heating
• Stress Relieving
• Trace Heating
• Transformers
• Tungsten lamps
• Ultraviolet Heaters
• Under floor Heaters
• Water Purification