Description

A dual mode firing circuit driven from a remote potentiometer, voltage or current signal operating on single and phase to phase loads.

A wide range of common voltage or current control signals is
accepted by the module plus manual control via a potentiometer.

The module will operate in either phase-angle or burst-fire mode.
It can be set up to soft-start in phase-angle mode, then switch
over to burst-fire mode once a pre-set output level is reached.

The unit is not restricted to 230v or 400v applications as the auxiliary
transformer can be selected to suit any line voltage up to 440v.

• Output status LED
  
• MONO-LINK™ firing system
  
• Adjustable soft start

Technical Specifications

Line Voltage:

5V to 440V RMS @ 50/60 Hz

Control Options:

Manual potentiometer (typically 5k§Ù)
Voltage signal (typically 0-5V DC)
Current signal (typically 4-20mA)

Auxillary Supply (Transformer):

10V to 18VAC @ 75mA

Soft Start:

1 to 30 seconds

Max Operating Temperature:

65¡ÆC

Dimensions:

L92 x W62 x H44mm

Applications

• Firing Circuit